Power On Sequence for new RXDA chasssis (dec 2020)

Starting in December 2020, Unitrends began issuing a new model of RXDA Archive Chassis.  This chassis has a unique power on sequence that might seem confusing.  This process was included in the packaging with these new units but is also copied here.  

Power up Sequences:

First Use on Power Cord Connection

1. Plug power cords into rear of unit
2. Wait until blue info panel blinks on left front of unit (up to 1 min)
3. Press power button on right of front panel once
4. Power up should begin in approx 3 seconds

Power Down Sequence:

1. Hold the power button on the unit.  the blue info button will start to blink after a few seconds
2. continue holding the power button until the blue light stops blinking
3. Release the power button
4. Unit will begin shutdown approx 10 seconds later

After a normal shutdown:

1. Press power button on right of front panel once
2. Power up should begin in approx 3 seconds

After a Power Loss event:

If the unit was on when power was lost, it should automatically reboot approx 15 seconds after power is restored.