Adding Traverse

To configure Traverse in Single Sign On please follow these steps

  1. Log into the AuthAnvil Manager https://(Your Domain)/AuthAnvil/Manager/
  2. Select Single Sign On.
  3. Select Roles.
  4. Select Create new Role
    Name the role Traverse Users
    Note: If you have other existing Roles for SSO users you can use one of these as well.
  5. Select Save Changes.
  6. Select Single Sign On.
  7. Select Applications.
  8. Select Add new Application.
  9. Select Add a custom application.
  10. Give the Application a name.
  11. Select Add a custom application.
  12. Name the Application Traverse 
  13. Select the Traverse role you designated in Step 4.
  14. Add the Traverse logo. (You can use the file attached to this article.
    Attached to this article is a file you can use for the image.
  15. Select Protocol Configuration.
  16. Choose SP-Init Redirect for the Protocol.
    Update the Reply to URL:
    Note: This should be set to match your Traverse login. Replace with your actual Traverse FQDN.
  17. Select Save changes.
  18. Select Single Sign On.
  19. Select Server Settings.
  20. Under Signing certificate select Show Certificate. The Encoded certificate will be needed for the Traverse configuration.

    Note: Save this using a notepad document using a .CER file type. You will need this for the Traverse portion of the configuration.

To configure Traverse please follow these steps.

  1. Log into your Traverse instance.
  2. Select Super User.
  3. Select Global Config.
  4. Select Enable Sign Sign-On.
    Paste in the SSO certificate for Identity Provider.
Was this article helpful?
1 out of 1 found this helpful
Have more questions? Contact us