How do I Configure AuthAnvil Two Factor Auth Integration in Continuum?

Enabling 2FA for Continuum Users

Step 1 – Configure Users

1. Log into Continuum as a Super User
2. Across the top of the screen click Setup
3. In the left-hand pane under Essentials click Users
4. Select the user that will be enabled for 2FA
5. Check the box for Require two-factor authentication and select AuthAnvil Two Factor Auth from the dropdown menu to enable 3 additional fields:

• AuthAnvil Server URL: Base domain name of your AuthAnvil 2FA server (i.e. https://demo.authanvil.com)
• AuthAnvil Site ID: Identifies a unique site on your AuthAnvil server (NOTE: If you do not have multitenancy enabled, use “1″)
• AuthAnvil Username: The name this user will authenticate against in AuthAnvil Two Factor Auth. This username must match a valid 2FA account
• Click Save to apply the changes to this user and enable two-factor authentication
• Repeat steps 3 – 6 for every member who needs to use AuthAnvil authentication

Step 2 – Test Login with 2FA

1. Log into Continuum using your normal Email ID and Password. A second login prompt will appear if you are enabled for 2FA:
2. Enter your AuthAnvil Passcode (PIN number + your One Time Password) into the login field
3. Click Login

You should now be logged in to Continuum!

Questions?

If you have any questions or need some help, we would be happy to assist. Open a case at help.scorpionsoft.com or send an email to support@scorpionsoft.com.