Suggested settings to export Cisco netflow v9 records to Traverse

Question:

How do I set up my firewall to export netflow v9 to Traverse?

Answer:

The actual settings may be model dependent. However, one of our customers has forwarded the below settings that worked for them:

-------------------------------- 
flow record NETFLOW-TO-TRAVERSE 
match ipv4 tos 
match ipv4 protocol 
match ipv4 source address 
match ipv4 destination address 
match transport source-port 
match transport destination-port 
match interface input 
collect interface output 
collect counter bytes long <------------------- take note 
collect counter packets long

flow exporter NETFLOW-TO-TRAVERSE 
destination 10.1.1.9 
source Loopback0 
transport udp 2059 
template data timeout 120 <------------------- take note

flow monitor NETFLOW-TO-TRAVERSE 
exporter NETFLOW-TO-TRAVERSE 
cache timeout active 60 <------------------- take note
record NETFLOW-TO-TRAVERSE

interface GigabitEthernet1/0/3 
ip flow monitor NETFLOW-TO-TRAVERSE input

interface GigabitEthernet1/0/10 
ip flow monitor NETFLOW-TO-TRAVERSE input

interface GigabitEthernet2/0/3 
ip flow monitor NETFLOW-TO-TRAVERSE input

--------------------------------

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Contact us