Note: This integration does not support the use of Push. You will need to use OTP.
Setting up MFA for RADIUS is a requirement for this integration. Please see this article for more information.
Runapt-get install libpam-radius-authto install the PAM Radius Authentication Module (pam_radius_auth).
Configure GDM for RADIUS Authentication by editing/etc/pam.d/gdmand adding the following line below the line#%PAM-1.0:
|auth required /lib/security/pam_radius_auth.so|
Note:If you need more verbose output, you can add the word debug to this line so that it reads:
|auth required /lib/security/pam_radius_auth.so debug|
Note:If you want the system to fail over to regular password authentication if the network connection is down, you can add the word localifdown to this line so that it reads: (Note that this represents a possible attack vector)
|auth required /lib/security/pam_radius_auth.so localifdown|
Note:If you comment out the following line, the system will not attempt to authenticate via standard Un*x password authentication, and use RADIUS Authentication via AuthAnvil only.
- Edit the file/etc/pam_radius_auth.conf(/etc/raddb/serveron some systems) and under the line:
|127.0.0.1 secret 1|
Add the line:
|IP_address(:port) shared_secret timeout|
Where IP_address is the IP address (and port, if using a RADIUS port other than the port defined in/etc/services) of your RADIUS server, shared_secret is the shared secret and timeout is the timeout value in seconds.
Log out of the system and return to the GDM Authentication Prompt
Enter your MFA tokenin the password field and click Log in. Shortly, a second password field will appear. Enter your regular Linux password in this field and click Log In. You will be delivered to your desktop.
Note:This configuration only protects GDM. A terminal logon or remote logon will still use the regular Linux password only. Due to the configurable nature of PAM, authentication on any login method can be strengthened by editing the appropriate configuration files.
For assistance with other configurations, including manually building and configuring the module, check outFreeRADIUS.orgs usage guide for the PAM Authentication and Accounting module.This guide includesa sample configuration filefor other configurations, as well as other usage instructions.