Configuring Access Gateway to support RADIUS Authentication
Step 1 - Go to the Start Menu and click on All Programs, then Citrix, then Access Gateway Administration Tool, then open Access Gateway Administration Tool.
Step 2 Log on to the Access Gateway administrator console.
Step 3 Click the Authentication tab.
Step 4 Create a new Authentication Realm, or delete and replace the Default realm, as appropriate.
Step 5 Click on Add, and set the Authentication Type to RADIUS authentication and click OK.
Step 6 - Type in the IP address, port, and shared secret of the AuthAnvil Radius Server, selectUse the password one time, then click Submit. (The AuthAnvil Radius Server runs on port 1812 by default)
Step 7 (Optional) - Click Advanced, change the Password labels to read Passcode and click OK.
Step 8 - Close the Citrix Access Gateway Administration Tool.
Step 9 Log on to the Citrix Access Gateway website you protected with AuthAnvil. You will now see a Passcode field in place of the Password field. The passcode for this field is your AuthAnvil PIN + the next OTP from your token.
If you have any questions or need some help, we would be happy to assist. Open a case at kaseya.zendesk.com .