Configuring XenApp or XenApp Fundamentals to support RADIUS Authentication
Step 1 -Go to the Start Menu and click onAll Programs, thenCitrix, then Management Consoles, then open Access Management Console.
Step 2 ExpandCitrix Resources, thenConfiguration Tools, thenWeb Interface, then click on the site that you want to add two factor authentication to.
Step 3 ClickConfigure authentication methods
Step 4- SelectExplicitthen click Properties
Step 5 Click onTwo-Factor Authentication, then set theTwo-factor settingto RADIUS
Step 6 -Type in the IP address and port of the AuthAnvilRadius Server, then clickOK. (The AuthAnvil Radius Server runs on port 1812 by default)
Step 7- ClickOK, thenOKagain, and close the Citrix Access Management Console.
Step 8 XenApp and XenApp fundamentals require that the RADIUS secret that has been configured between this client and the AuthAnvil RADIUS Server is placed in a text file in the Citrix\RADIUS\CONF directory.
- Go to C:\inetpub\wwwroot\Citrix\<site_name>\conf folder and create a file called radius_secret.txt.
- Open this text file and enter your RADIUS shared secret passcode.
- Save the file and close it.
- For Web Interface 5.2 or later: Go tofolder and open the file Web.config with a text editor like Notepad. On Java application servers, the fileis web.xml file.
- Search for line # 102 or the following parameter:
<add key="RADIUS_NAS_IDENTIFIER" value="" />12.
- For value, enter any alphanumeric value longer than 3 characters.
- Save the Web.config file and test your Web Interface site.
- To test the Site, log on to the website you protected with AuthAnvil. You will now see a Passcode field.
- The passcode for this field is your AuthAnvil PIN + the next OTP from your token.
If you have any questions or need some help, we would be happy to assist. Open a case atkaseya.zendesk.com.